background image

For  a  period  of  11  years  from  the  date  of  your  purchase  of  any  SurgeX  product, 
SurgeX  warrants  the  product  against  defects  in  materials  used  by  SurgeX  or 
workmanship performed by SurgeX (a "Covered Product"). SurgeX's obligations with 
respect to a Covered Product are to provide, at no charge, all labor and parts (either 
new or rebuilt, as determined in SurgeX's sole discretion) necessary for the repair of 
the  Covered  Product.  If  SurgeX,  in  its  sole  discretion,  determines  that  a  Covered 
Product is not repairable, SurgeX will replace the Covered Product with a product of 
like kind, quality and functionality. In order to obtain the services under this Limited 
Warranty, you are responsible for delivering the Covered Product, at your sole cost, to 
SurgeX,  and  for  providing  SurgeX  with  a  copy  of  the  dealer's  dated  bill  of  sale  as 
evidence of the date of purchase of the product. This Limited Warranty is only valid for 
consumers in the United States and Canada.

THIS ELEVEN YEAR WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY MADE BY 
SURGEX  WITH  RESPECT  TO  THE  PRODUCT.  ALL  IMPLIED  WARRANTIES  WITH 
RESPECT  TO  THE  PRODUCT  INCLUDING,  BUT  NOT  LIMITED  TO,  IMPLIED 
WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE 
OR IMPLIED WARRANTIES ARISING OUT OF COURSE OF DEALING OR USAGE 
OF TRADE ARE HEREBY EXPRESSLY DISCLAIMED AND EXCLUDED.

The SurgeX Product Warranty does not apply to any product which is defective due to 
any causes beyond SurgeX's control such as negligence, abuse, misuse, acts of god, 
modifications to the product or third party repair of the product.

THE  LIABILITY  OF  SURGEX  (IF  ANY)  AND  YOUR  SOLE  AND  EXCLUSIVE  REMEDY 
FOR ANY ALLEGEDLY DEFECTIVE SURGEX PRODUCT SHALL BE LIMITED TO REPAIR 
OR REPLACEMENT OF THE PRODUCT IN ACCORDANCE WITH THE TERMS AND 
CONDITIONS  OF  THIS  LIMITED  WARRANTY.  IN  NO  EVENT  WILL  SURGEX  BE 
LIABLE  FOR  ANY  SPECIAL,  INDIRECT,  INCIDENTAL  OR  CONSEQUENTIAL 
DAMAGES.

NOTE: 2 YEAR WARRANTY ON UPS BATTERIES.

The most trusted name in 

power protection.

5 1 7  N o r t h  I n d u s t r i a l  D r.
Z e b u l o n ,   N C   2 7 5 9 7

o r d e r d e s k @ s u r g e x . c o m
w w w . s u r g e x . c o m

8 0 0 . 6 4 5 . 9 7 2 1
9 1 9 . 2 6 9 . 0 4 5 4   f a x

© SurgeX 2011

Summary of Contents for SU-2000Li

























Reviews: