background image

    UPS-1000-Li-2                         User Manual

 

 

 

 

 

 

 

       

   © 2019 AMETEK Electronic Systems Protection   /   Technical Support: 1-800-645-9721   /   surgex.com                       

  7 

 

 

 

 

VI.

 

REPLACING THE BATTERY (QUALIFIED SERVICE PERSONNEL ONLY) 

 

 

Please read all of the 

WARNINGS 

and 

CAUTIONS 

before attempting to service  the  batteries.  Typical  battery  life  is  3  to  5  years.  

Environmental factors do  affect  battery  life.   High  temperatures,  poor  utility  power,  and  frequent, short duration discharges have a 
negative impact on battery life. 

 

WARNING!  

This UPS-1000-Li-2 contains potentially hazardous voltages.   Do not attempt to disassemble the UPS-1000-Li-2 beyond 

the battery replacement procedure. This UPS-1000-Li-2 contains no user serviceable parts.  Repairs and battery replacement must be 
performed by 

QUALIFIED SERVICE PERSONNEL ONLY.

 

 

CAUTION: 

Do not open or mutilate batteries.  Released electrolyte is harmful to the skin and eyes and may be toxic. 

 

CAUTION: 

Do  not  dispose  of  batteries  in  a  fire.  The  batteries  may  explode.  The  batteries  in  this  UPS-1000-Li-2  are  recyclable.  

Dispose of the batteries properly. The batteries contain lead and pose a hazard to the environment and human health if not disposed of 
properly.   Refer to local codes for proper disposal requirements. 

 

CAUTION: 

The battery system can present a risk of electrical shock.  These batteries produce sufficient current to burn wire or tools 

very rapidly, producing molten metal.  Observe these precautions when replacing the batteries: 
1.  Remove watches, rings, or other metal objects. 
2.  Use hand tools with insulated handles. 
3.  Wear protective eye gear (goggles), rubber gloves and boots. 
4.  Do not lay tools or other metal parts on top of batteries. 
5.  Disconnect the charging source prior to connecting or disconnecting the battery terminals. 
6.   Determine if the battery is inadvertently grounded.  If the battery is, remove the source of the grounding.  Contact with any part of a 

grounded battery can result in an electrical shock.  The likelihood of such shock will be reduced, if such grounds are removed during 
installation and maintenance. 

 

CAUTION: 

Replace  batteries  with  the  same  number  and  type  as  originally  installed  in  the  UPS-1000-Li-2.  These  batteries  have 

pressure operated vents.  These UPS-1000-Li-2s contain sealed non-spillable maintenance-free lead acid batteries. 

Summary of Contents for UPS-1000-Li-2














Reviews: