XU115 Manual
8
XU115-510
Surge Protection Specifications
Surge Protection:
Advanced Series Mode® surge elimination
Surge Energy Rating:
6,000 volts/3,000 amps
Let through Voltage (6,000 volt surge):
0 volts
UL 1449 Adjunct Classification Test Results:
1000 surges, 6000 volts, 3000 amps, B3 pulse; Measured
suppressed voltage: 170 volts; no failures.
Federal Guidelines:
Grade A, Class 1, Mode 1 (CID A-A-55818)
EMI/RFI Filter, Normal Mode (50-ohm load):
40 dB @ 100 kHz; 50 dB @ 300 kHz; 50 dB @ 3 MHz; 50
dB @ 30 MHz
EMI/RFI Filter, Common Mode (50-ohm load):
18 dB @ 300 kHz; 30 dB @ 1 MHz; 50 dB @ 5 MHz; 50
dB @ 20 MHz
Maximum Applied Surge Voltage:
6000 volts*
Maximum Applied Surge Current:
Unlimited, due to current limiting*
Maximum Applied Surge Energy:
Unlimited, due to current limiting*
Endurance (C62.41-1991 Category B3 pulses):
1kV>500,000; 3 kV>10,000; 6 kV>1000
General Specifications
Warranty:
(USA and Canada only) 10-year limited warranty
Battery Warranty:
2 years
Monitoring Software:
Includes SentryPlus software
Communications:
USB
Rack Size:
2U
Unit Dimensions (H x W x D):
3.5” x 19.0” x 10.5”
Unit Weight (lbs.):
32.0 lbs.
Operating Temperature:
32°F to 104°F (up to 5,000 ft above sea level (0°C to +40°C (up to 1,500 meters
above sea level)
Operating Elevation:
32°F to 95°F (5,001-10,000 ft above sea level (0°C to +35°C (1,501 to 3,000 meters
above sea level)
Storage Temperature/Relative Humidity:
5°F to 113°F (-15°C to +45°C) / 0 - 95% non-condensing
Humidity Range:
5% to 95% R.H., non-condensing
* 1.2 x 50 μs pulse, industry standard combination wave surge, as per IEEE C62.41.
** Specifications subject to change without notice.
*CAUTION: Do not install this device if there is not at least 10 meters (30 feet) or more between the
electrical outlet and the electrical service panel.
