00ZX418369E-01
5/16
○
Instructions on Mounting
○
Instructions on Maintenance and Inspection
●
Release pressure from the piping before attaching/detaching the
connector. A pressurized condition may cause spouting of
chemicals, resulting in personal injury.
●
Always wear anti-chemical protective gear (protective gloves,
protective mask, and protective clothing) that protects your entire
body when attaching/detaching the connector. A contact with
chemicals may cause personal injury.
●
Attach/detach the connector in a clean place with no dust.
Degradation of sealing performance due to adhesion of dust may
cause liquid leakage, resulting in personal injury.
●
Always attach/detach the connector at right angle to the surface of
container. Attaching/detaching the connector at an angle may
cause spouting of chemicals, resulting in personal injury.
●
Do not apply the connector to rotary joint or other rotary
application. Lower tackiness caused by the wrong application may
result in personal injury due to leakage of chemical fluids.
●
When the connector is connected, make sure that the connector is
fully connected. The chemicals may splash and personal injury
may be caused.
●
Use out of the operating pressure range may result in slip-off. Be
sure to use within the operating pressure range.
DANGER
This is Mandatory Rule!!
●
Surpass Industry is not be liable to any failure or leakage of the product
due to O-Ring replacement and/or disassembly performed by any
parties other than Surpass Industry.
●
When you need maintenance work, please call Surpass Industry.
CAUTION
・
Apply operating fluid or pure water to the O-Ring of the socket
(inner) or O-Ring sliding part of the plug (sealing part) when
connecting the socket or plug to prevent the O-Ring from being
damaged and to reduce the slide resistance (insertion load).
・
Do not use abrasive compound or fluid that is easy to clot as
they may impair normal function.
