Maintenance
13
3.6
Changing the hook nozzle
Burn hazard!
When carrying out the working steps described below, you must wear
heat-protective gloves!
To replace a defective hook nozzle, please carry out the following steps.
1. Heat the device up.
2. Separate the device from the mains by removing the mains plug.
3. Unscrew the defective hook nozzle (1) above a suitable surface.
4. Screw in the new hook nozzle with the tip pointing downwards and lock it
with the nut. Then wait 4 minutes until the nozzle has heated completely.
Note
The hook nozzle has been designed for glueing the rear side of skirting
boards.
Protect from impacts and bending!
4
Maintenance
The device is maintenance-free. It is not fitted with any wear parts.
5
Repair
Repairs may only be carried out by trained electricians.
For your own safety, we recommend that you use our rapid and inexpensive
replacement service.
6
Warranty
The device has been developed and manufactured using state-of-the-art
technology. We offer all original purchasers a warranty corresponding to the
statutory requirements for function, material and manufacture. Normal wear
and tear is excluded.
The warranty ceases if incorrect handling, application of force, use of non-
original adhesive, repair by third parties or fitting of non-original spare parts
is determined.
The warranty includes overhaul or replacement as decided by the manufac-
turer. Any warranty beyond our scope of delivery is excluded since we have
no influence on the correct and professional use of the device.
Please observe our general terms and conditions!
GB
H1079XM_191202.indd 13
18.12.19 09:11
Summary of Contents for Dollken Profiles HKP 2.0 E
Page 33: ...33 1 1 1 1 200 C Xi 1 2 1 2 D llken RUS H1079XM_191202 indd 33 18 12 19 09 11...
Page 34: ...34 5 2 HKP 2 0 E 1 1 2 2 1 HKP 2 0 E D llken RUS H1079XM_191202 indd 34 18 12 19 09 11...
Page 37: ...37 Bild 2 3 4 D llken 18 C 3 5 6 20 3 6 1 2 3 1 RUS H1079XM_191202 indd 37 18 12 19 09 11...
Page 38: ...38 4 4 4 5 6 RUS H1079XM_191202 indd 38 18 12 19 09 11...
