25
E N G L I S H
5
6
7
8
9
10
11
12
13
A
V
mV
OL
Test of diode.
The continuity buzzer is on.
Maximum reading displayed.
Date hold is active.
Ω
: Ohm. The unit of resistance.
k
Ω
: kilohm. 1 x 10³ o 1 000 ohms.
M
Ω
: Megaohm. 1 x 10
6
or 1 000 000 ohms.
Amperes (amps). The unit of current.
Volts: The unit of voltage.
mV: Millivolt. 1 x 10¯³ or 0,001 volts.
Indicates negative reading.
The input value is too large for the selected range.
DC Voltage Measurement
(Figure 3)
Warning
To avoid harms to you or damages to the Meter
from electric shock, please do not attempt to
measure voltages higher than 600 V AC/DC
although readings may be obtained.
The DC Voltage ranges
are : 200 mV, 2 V, 20 V, 200
V and 600 V
To measure DC voltage,
connect the Meter as
follows:
1. Insert the red test lead
into the
V
Ω
terminal
and the black test lead
into the
COM
terminal.
2. Set the rotary switch to
V
.
3. Connect the test leads
across with the object
being measured. The
measured value shows on
the display.
A.
MEASUREMENT OPERATION
Figure 3
