background image

14

COMP425K
VOLTAJE-FRECUENCIA

127 V ~ 60 Hz

CORRIENTE MÁXIMA

12,5 A

CAPACIDAD DEL TANQUE

25 L

CAUDAL MÁXIMO

224 L/min (7,9 CFM)

PRESIÓN MÁXIMA

115 PSI

VELOCIDAD EN VACÍO

3 450 r/min

POTENCIA

2 HP

HORAS DE USO MÁXIMO

6 hours

NIVEL DE RUIDO

88 dB

NIVEL DE RUIDO

85 °C - 90 °C

PESO

21,4 kg (47,1 lb)

COMP550B
VOLTAJE-FRECUENCIA

127 V ~ 60 Hz

CORRIENTE MÁXIMA

13,2 A

CAPACIDAD DEL TANQUE

50 L

CAUDAL MÁXIMO

233 L/min (8,2 CFM)

PRESIÓN MÁXIMA

115 PSI

VELOCIDAD EN VACÍO

3 450 r/min

POTENCIA

2,5 HP

HORAS DE USO MÁXIMO

6 hours

NIVEL DE RUIDO

92 dB

NIVEL DE RUIDO

85 °C - 90 °C

PESO

29,5 kg (69 lb)

COMP6120V
VOLTAJE-FRECUENCIA

127 V ~ 60 Hz

CORRIENTE MÁXIMA

12,6 A

CAPACIDAD DEL TANQUE

120 L

CAUDAL MÁXIMO

335 L/min

PRESIÓN MÁXIMA

115 PSI

VELOCIDAD EN VACÍO

3 450 r/min

POTENCIA

3 HP

HORAS DE USO MÁXIMO

8 hours

NIVEL DE RUIDO

92 dB

NIVEL DE RUIDO

85 °C - 90 °C

PESO

83,8 kg (184,74 lb)

COMP6100B
VOLTAJE-FRECUENCIA

127 V ~ 60 Hz

CORRIENTE MÁXIMA

12,6 A

CAPACIDAD DEL TANQUE

100 L

CAUDAL MÁXIMO

206 L/min (7,3 CFM)

PRESIÓN MÁXIMA

115 PSI

VELOCIDAD EN VACÍO

3 450 r/min

POTENCIA

2 HP

HORAS DE USO MÁXIMO

8 hours

NIVEL DE RUIDO

92 dB

NIVEL DE RUIDO

85 °C - 90 °C

PESO

70 kg (154,3 lb)

COMP6200B
VOLTAJE-FRECUENCIA

127 V ~ 60 Hz

CORRIENTE MÁXIMA

24 A

CAPACIDAD DEL TANQUE

200 L

CAUDAL MÁXIMO

335 L/min (11,83 CFM)

PRESIÓN MÁXIMA

115 PSI

VELOCIDAD EN VACÍO

3 450 r/min

POTENCIA

3 HP

HORAS DE USO MÁXIMO

8 hours

NIVEL DE RUIDO

92 dB

NIVEL DE RUIDO

85 °C - 90 °C

PESO

106 kg (233,7 lb)

ON-RECEIPT INSPECTION

Each air compressor outfit is carefully tested and 
checked before shipment. With improper hand-
ling , damage may result in transit and cause 
problems with compressor operation.
Immediately upon arrival, check equipment for 
both concealed and visible damages to avoid ex-
penses being incurred to correct such problems. 
This should be done regardless of any visible 
signs of damage to the shipping container. If 
this product was shipped directly to you , report 
any damages to the carrier and arrange for ins-
pection of goods immediately .

OPERATION INSTRUCTIONS

GENERAL INFORMATION

This air compressor requires oil. Now you can 
enjoy all the benefits of having an oil lubricated 
professional air compressor. When oil is changed 
regularly, it will give you long, trouble-free life.
Your air compressor can be used for operating 
paint spray guns, air tools, caulking guns, grea-
se guns, air brushes, sandblaster, inflating tires 
or spraying weed killers, insecticides, etc. An air
pressure regulator is supplied for these applica-
tions.
Separate air transformers which combine the 
functions of air regulation and / or moisture and 
dirt removal should be used where applicable.

LUBRICATION AND OIL

 CAUTION: Do not attempt to operate th is air 

compressor without first adding oil to the crank-
case . Serious damage will result from even limi-
ted operation unless filled with oil and broken 
in correctly. Make sure to closely follow initial 
start-up procedures.  Compressor oil is provided; 
on a level surface, please fill the crankcase to 
proper level indicated on the sight glass.

LOCATION OF THE AIR COMPRESSOR
Locate the air compressor in a clean, dry and 
well-ventilated area. The air filter must be kept 
clear of obstructions, which could reduce air de-
livery of the air compressor. The air compressor 
should be located at least 12 inches away from 
the wall or other obstructions that will interfere 
with the flow of air. The air compressor head 
and shroud are designed to allow for proper 

MAX.

MIN.

Summary of Contents for COMP410





















Reviews: