132
patrol list in the order that they are to be viewed. Points can also be
removed by highlighting them and clicking on the
<<
button.
3.
Select the length of time the camera will dwell at each preset point
before continuing from the
Dwelling Time (Sec)
dropdown.
4.
Select one of the following:
Stop Time
– The camera will stop the number of minutes
specified in the box between patrol sessions.
Never Stop
– The camera will not stop between patrol sessions.
5.
Click the
Active
button to activate the patrol list.
6.
Click the
OK
button to save the patrol list and exit the popup.
Note:
PTZ Patrol Settings can also be configured by clicking
Camera List >
Camera Settings > Patrol Settings
in the VMS Console.
