180
4.
Enter a valid E-mail address in the
Reply Address
field. This address
will
be the default sender listed in E-mails sent from the Server.
5.
Enter one or more E-mail addresses in the
Recipients
: field. These
address(es) will receive notifications from the Server. Multiple addresses
can be entered by separating individual addresses with semi -colons “;”.
6.
Enter the subject of your notification E-mails, e.g., Server-
xxxsite1notification in the
E- Mail Title
field.
7.
Enter a short message in the large field to describe the Server or a
surveillance network.
8.
(Optional)
Click
Test
to send a test message to the E-mail addresses
listed.
9.
Click the
OK
button to exit E-mail settings.
SMS
When the alarm is triggered, an SMS message will be sent. Checking this option
will bring up the
SMS Settings
menu.
Note:
Drivers for supported GSM/GPRS modems have already been installed on the
server. Currently, only the
WaveCOM-M1206B
is supported. Use COM1 on the
Server to connect to a GSM modem.
