25
Figure 3-1 Installing Rear Inner Chassis Rails
3.1.3.
Installing the Rack Rails
Determine where you want to place the NVR2100 in the rack. Position the
chassis rail guides at the desired location in the rack, keeping the sliding rail
guide facing the inside of the rack. Screw the assembly securely to the rack
using the brackets provided. Attach the other assembly to the other side of the
rack, making sure that both are at the exact same height and with the rail
guides facing inward.
3.1.4.
Installing the Server into the Rack
You should now have rails attached to both the chassis and the rack unit. The
next step is to install the server into the rack. Do this by lining up the rear of
the chassis rails with the front of the rack rails. Slide the chassis rails into the
rack rails, keeping the pressure even on both sides (you may have to depress the
locking tabs when inserting).
When the server has been pushed completely into the rack, you should hear the
locking tabs "click".
