63
3.
(Optionally)
Double-click any camera entry to bring up the camera detail
page. From this page you may change the following information:
IP Address
– Changing this value will affect connectivity.
Camera Port
–
The web access port, default is 80.
Stream Port
– Default is 6002.
Vendor
– Changing this value will affect connectivity.
Model
– Changing this value will affect connectivity.
User Name
– This value is not always required.
Password
– This value is not always required.
Camera Name
– It is recommended you change this value if you
have more than one camera of this make/model.
Camera Description
Camera Icon
–
You can also import your own icon by clicking on
the
Browse
button and choosing an icon file. Valid icon files
include JPEG, GIF, PNG, BMP and ICON files.
Finally, you can access the web interface for the camera by clicking on
the
Go to Web Interface
button. Click
OK
to save your changes, or
Cancel
to exit without saving.
4.
(Optionally)
You may access the IP Utility for camera configurations by
clicking the
IP Camera Utility
button.
5.
Click
OK
to add the selected cameras to the Server.
