Standard Operating Procedures
L410 UVP-E20
Document No.:
SOP-L410-1
Page 7- 15
Rev: 1
Date: JAN 18
Prepared by: LA
Checked by : CLS
At glideslope intercept
PF:
“GLIDE SLOPE CAPTURED
PM:
“CHECK”
Call made by
PM
when glide
Slope annunciator turns
green.
Response made by
PF
Selecting missed approach altitude
on AMS
PF:
“SET MISSED APPROACH
ALTITUDE”
PM:
“MISSED APPORACH
ALTITUDE SET”
PF
request altitude as per plate
PM
sets missed approach
altitude.
Prior to 1,500 feet AGL, crew confirms the
final configuration for landing.
PF:
“FLAP 42”
PM:
“FLAP 42 SELECTED, FLAP 42”
PF
“CHECK”
IF REQUIRED
PF
request flap 42.
PM
selects flap as requested.
Landing Checklist at 1,500 feet AGL
PF:
“LANDING CHECKLIST”
PM:
“LANDING CHECKLIST”
PM
“LANDING CHECKLIST
COMPLETE”
PF
request the checklist
PM
reads the checklist and then
calls for checklist complete.
At the outer Marker/beacon/4 nm DME,
whichever is applicable
PF:
“OUTER MARKER ____ FT”
PM:
“CHECK” or calls the
deviation.
Eg. “100 feet high”
Call made by
PF
on passing
The outer marker.
Crew shallcheckaudio and
altitude at the outer marker.
at 1,000 ft AGL
PM:
“one thousand feet, stable”
or
PM:
“one thousand feet, not
stable, go around”
Called made by the
PM.
If the
PM
calls not stable,
PF
must initiate go around. Refer
to go around procedure
7.20,1
100 ft above DA/H
PF:
“100 ABOVE,
PM: “
LOOKING UP”
Call made by
PF, PM
shall look
out for required visual
refernces.
Summary of Contents for L410 UVP-E20
Page 5: ......
