Standard Operating Procedures
LET 410 UVPE-20
Document No.:
SOP-LET410
Page 2- 12
Rev: 1
Date: Nov 17
Prepared by: L.A.
Checked by: C.L.S.
RUNWAY CONDITIONS (DEMONSTRATED VALUES)
The take-off and the landing are demonstrated from and on paved and
unpaved runways which comply with the following requirements:
Paved take-off and landing runways:
The friction coefficient of the take-off and landing runway is at least 0.2;
The layer of water does not exceed 10 mm;
Unpaved take-off and landing runways:
The runway subsoil strength shall be at least 6.0 kg/cm2.
The thickness of the muddy upper soil layer does not exceed 50 mm.
Summary of Contents for L410 UVP-E20
Page 5: ......