Installation Instructions for Models:
MS-Super 4, MS-Super 5 and MS-Super 6
1.
Install each unit as in a single installation.
2.
Connect the SMART/PLUS control to either unit per instructions supplied with the SMART/PLUS control.
3.
Using the interconnecting cable provided (PN 103608) connect the Black plug to the Liquid Level Control
Board Terminal marked TANDEM in the same unit connected to the SMART/PLUS control. Connect the White
plug to the second unit, to the White receptacle located above the water inlet.
4.
Connect separate plumbing and power supplies for each unit.
Single Phase Wiring Diagram
with Smart/Plus control
Mr
S
team
Installation, Operation & Maintenance Manual
9
Wiring Diagram: MS-Super-4, MS-Super-5,
MS-Super-6 Single Phase Models