Mr
S
team
Installation, Operation & Maintenance Manual
It’s Easy to Select the Right Mr.Steam Model
1.
Measure the Length, Width, and Height in feet
of the steam enclosure to be used.
Multiply the Length x Width x Height to get the
basic room volume in CUBIC FEET (a)
___________________________________________________________________________________________________________
2.
If the interior wall construction material within the steam enclosure is
natural marble, stone, slate, glass block or concrete, copy the figure
from box (a) to box (b).
___________________________________________________________________________________________________________
3.
Total (a) and (b) to obtain Total Basic Cubic Feet
___________________________________________________________________________________________________________
4.
Increase (a) by 15% for each of the following design features that
describe the steambath enclosure:
• One exterior outside wall
• Tile or mud wall
• An extra glass panel in addition to the door
• A cast iron tub or marble bench
5.
For steambath rooms higher than 8 ft., add 15% to the
total in box (c)
___________________________________________________________________________________________________________
ADD BOXES (d) THROUGH (h) TO BOX (c) = TOTAL CUBIC FEET REQUIRED
__________________________________________________________________________________________________________
Compare the total cubic feet required (i) to the specification chart below and select the appropriate model.
___________________________________________________________________________________________________________
IMPORTANT:
THE FORMULA FOR SELECTING THE STEAMBATH GENERATOR IS A RECOMMENDATION ONLY.
BECAUSE OF VARIABLES IN CONSTRUCTION,THESE SIZING INSTRUCTIONS AND SPECIFICATIONS SHOULD BE
CONSIDERED AS GUIDELINES ONLY. NO HEATING,VENTING OR AIR CONDITIONING DEVICES SHOULD BE
INSTALLED INSIDE THE STEAM ROOM.
MrSteam
will review the model selected provided we receive complete information, including working drawings,
specifications, and pertinent electrical and construction details. Otherwise the manufacturer disclaims responsibility for
the sizing of a model selected.
L
W
H
a
b
c
d
e
f
g
h
i
Model No.
Kw
Maximum Room Available Voltage Amps
Volume (cu.ft.)
50 60/HZ
_____________________________________________________________________
MS65
4.5
65
208V/1PH
22
240V/1PH
19
_____________________________________________________________________
MS90
5
100
208V/1PH
24
240V/1PH
21
_____________________________________________________________________
MS150
6
175
208V/1PH
29
240V/1PH
25
_____________________________________________________________________
MS225
7.5
250
208V/1PH
36
240V/1PH
32
_____________________________________________________________________
MS300
8.5
325
208V/1PH
41
240V/1PH
36
____________________________________________________________________
MS400
9
375
208V/1PH
44
240V/1PH
38
_____________________________________________________________________
MS Super 1
10
475
208V/1PH
49
240V/1PH
42
_____________________________________________________________________
MS Super 2
12
575
208V/1PH
58
240V/1PH
50
_____________________________________________________________________
MS Super 3
15
675
208V/1PH
73
240V/1PH
63
_____________________________________________________________________
MS Super 4 Package 20
875
208V/1PH
97
240V/1PH
84
_____________________________________________________________________
MS Super 5 Package 24
1075
208V/1PH
116
240V/1PH
100
_____________________________________________________________________
MS Super 6 Package 30
1275
208V/1PH
145
240V/1PH
125
Models MS65-MS400 supplied standard with
a SMART⁄ONE control. All Super Models sup-
plied standard with a SMART⁄PLUS control. All
standard controls supplied in polished chrome
with a white accent trim. Polished chrome
steamhead supplied standard.
MS-Super-4 Package includes two
MS-Super-1 generators and one
SMART⁄PLUS Control.
MS-Super-5 Package includes two
MS-Super-2 generators and
one SMART⁄PLUS Control.
MS-Super-6 Package includes two
MS-Super-3 generators and
one SMART⁄PLUS Control.
Models MS65-MS400 measure
19" L x 14
3
⁄
4
" H x 6
3
⁄
4
" D and
weighs 28 lbs. Each SUPER series
measure 24" L x 18
3
⁄
4
" H x 7
7
⁄
8
" D
and weighs 45 lbs.
Call for availability of additional voltages
and phases.
16
