35
BUFR Content Options
When the selected format is “BUFR”, the telemetry device settings (e.g., Satlink, LANTx,
GPRS, or Iridium), offer the following BUFR content option settings for edit (accessed by
pressing the “BUFR” button on the telemetry device settings dialog):
Originating Center
Select the originating to use in the BUFR message. If the desired center is not listed in the dialog
drop-down, simply enter the desired value, with its numeric component, first (e.g., “34 - My
originating center”). If the field is left blank, 0 is used.
Data Category
Select the data category to use in the BUFR message. If the desired category is not listed in the
dialog drop-down, simply enter the desired value, with its numeric component, first. If the field
is left blank, 0 is used.
Data Sub-category
Select the data subcategory to use in the BUFR message. If the desired subcategory is not listed
in the dialog drop-down, simply enter the desired value, with its numeric component, first. If the
field is left blank, 0 is used.