Sutron Corporation X-Link Operations & Maintenance Manual, Rev 1.63 5/24/2016 pg. 117
Event
Description
Reset
Powerup
Condition:
Logged when X-Link is powered on. Logged with the
cumulative total number of power on resets. If that number is
100, it means it is the 100
th
time the unit was powered on.
Time logged:
Value logged:
Reset
Upgrade
Condition:
Similar to Reset Powerup, but logged after a software upgrade.
Time logged:
Value logged:
Reset Soft
Condition:
Similar to Reset Powerup, but logged when the REBOOT
command is issued and when the system intentionally resets
itself.
Time logged:
Value logged:
Reset
Condition:
A system failure results in a system reset.
Time logged:
Value logged:
Log
Download
Condition:
Logged when the log is downloaded.
Time logged:
Value logged:
Setup
Change
Condition:
Logged when any part of the setup is changed. Details of the
setup change are not logged.
Time logged:
Value logged:
Hardware
Fail
Condition:
Logged along with a code to indicate a potential problem with
the hardware.
Time logged:
Value logged:
Login
Valid
Condition:
Logged to indicate that the user logged into a password
protected station.
Time logged:
Value logged:
Login Fail
Condition
Condition: The wrong password was entered.
Time logged:
Value logged:
Password
Changed
Condition:
The user changed the password.
Time logged:
Value logged:
Alarm In
Condition:
The system went into alarm. The index of the measurement
that caused the alarm event is logged. The measurement
reading that caused the alarm will be logged separately.
Time logged:
Value logged:
Alarm Out
Condition:
The system went out of alarms. The measurement reading that
caused the alarm is also logged.
Time logged:
Value logged:
Calibration
Condition:
When a sensor is calibrated, X-Link will log the readings before
and after the calibration along with a calibration event.
Time logged:
Value logged:
The number logged with the calibration is the index of the
measurement index that was calibrated.
SDI-12
Condition:
An SDI-12 reading has failed.
