Sutron Corporation X-Link Operations & Maintenance Manual, Rev 1.63 5/24/2016 pg. 119
10.
Password
Password protection can be configured to prevent unauthorized access.
If password protection is enabled, a user who is connected via USB can view
setup and data. However, no changes to setup are allowed until a password is
entered. A password prompt automatically appears when a setup change is
attempted.
If password protection is enabled and the user is remotely accessing the station,
whether via a message or a TCP/IP session, no access is allowed until the correct
password is provided.
LinkComm provides a Password menu that can be used to log in, change the
password, and log out. LinkComm will prompt for a password when it is needed.
10.1.
Creating a Password
10.1.1.
Creating a Password via Command Line
Using the command line, type PASSWORD = XXX to set password to XXX. To log
in, type LOGIN=XXX. Type PASSWORD = to disable password usage.
10.1.2.
Working with a Password-Protected Station
When sending a message to a password protected station, the first line of the
message must have the login command LOGIN=XXX.
Logging out is accomplished either by:
selecting the
Password->Log Out
menu in LinkComm,
typing EXIT in the command line,
disconnecting the USB cable,
closing the TCP/IP session, or
powering down the unit.
