Sutron Corporation X-Link Operations & Maintenance Manual, Rev 1.63 5/24/2016 pg. 32
4.3.
Dashboard Tab
The Dashboard tab is the first tab displayed after you connect to X-Link. When
LinkComm connects to X-Link, it always retrieves the current station status, and
current data values for measurements, and displays this data on the Dashboard.
The data displayed on the Dashboard always reflects the state of X-Link the last
time you refreshed status, regardless of the measurements you may or may
not have defined under Measurements.
To refresh the current status, click the
Refresh Status
button
To reset the station status, including the transmission counters, tallies and
system errors, click the
Clear Status
button. Once the status is reset, the
previous status is lost
To show the status text actually received from the logger, press the
Show
Details
button
4.3.1.
Station Status
The upper left of the Dashboard tab displays the most important information
about the station, including the station time, recording start time, number of
measurements enabled, etc.
