Installation and Commissioning
P Line Touch Panel
36
2.4
Switching On
When switching on the operating system loads. The interface for SD/SDHC cards
is available for applications and other data.
2.4.1
Cockpit
The operating device allows you - by starting the cockpit during the startup phase
- to make changes to the device configuration.
Start cockpit at system
startup
To start the cockpit, do the following:
1. Wait during the startup phase until the following dialog is displayed:
Figure 2-28 Cockpit startup phase
2. Press the button to start the cockpit before the progress bar is down.
You can customize the language of the cockpit interface at the language menu
item.
3. Press the button
Language Selection
.
4. Select the desired language.
5. Confirm your selection with the green check.
Using desktop icon to
start cockpit
You can start the cockpit via the desktop icon at already started operating devices
with active desktop:
1. Briefly press twice on the desktop icon.
2. Press the button to start the cockpit before the progress bar is down.
You can customize the language of the cockpit interface at the language menu
item.
3. Press the button
Language Selection
.
4. Select the desired language.
5. Confirm your selection with the green check.
Summary of Contents for P Line
