TRIO MPC-145 SERIES MICROMANIPULATOR SYSTEM OPERATION MANUAL – REV. 2.62C (20191001) (FW V2.62)
21
3.
OPERATIONS
3.1
Main Controls and Indicators on the ROE/Controller
Figure 3-1. Front view of the TRIO MPC-100 ROE/Controller
3.2
Display
3.2.1
Initial Startup
Figure 3-1. LCD Display showing startup screen.
When starting the TRIO MPC-100 system for the first time or if the HOME position has not
yet been defined (saved), the values of all four axes will be 1,000 micrometers (microns).
Figure 3-2. Startup screen
Figure 3-3. Device A factory default startup (Home) position after calibration
SUTTER
INSTRUMENT CORP.
(Text in
Green)
TRIO / MPC-100
REV 2.62
(Text in
Green)
(Text in
Green)
X= 1000 Y= 1000
Z= 1000 Speed 0
DISPLAY
Y-AXIS
CONTROL
Z-AXIS
CONTROL
MANIPULATOR
SELECT
X-AXIS
CONTROL
HOME
WORK
PULSE
(ANGLE-SET)
RELATIVE
SPEED (LOCK)
D-AXIS
CONTROL
(SYNTHETIC)
