background image

43

3. Scroll the list with the arrow buttons until the logbook file you want to view is active

and press 

Suunto

. The first display is shown.

4. Press the 

up

 arrow to move to the next display. The displays contain the following

information:
• Starting date and time, total time of the file and the number of runs. An ascent and

consecutive descent of at least 50 meters is considered a run.

• Total ascent and the average ascent rate
• Total descent and the average descent rate
• The highest point, date and time
• The lowest point, date and time
• Average heart rate
• The minimum and maximum heart rates
• The marks the user has added to the logbook file include the altitude, heart rate,

date and time of the mark. The maximum number of marks is 10.

To return to the main display, press 

Suunto

 or 

Stop/CL

 for more than 2 seconds.

NOTE: If you try to view the list but there are no saved logbook files, the message “

NO

LOGBOOK

 

FILES

” is displayed and you return to the logbook menu.

NOTE: If the heart rate monitor was not active during the logbook recording, the text
“- -“  is visible on the heart rate displays.

Erasing logbook files

To erase a log file:
1. In the Function menu, scroll to 

Logbook

 with the arrow buttons and press 

Suunto

.

2. Scroll to 

Erase 

with the arrow buttons and press 

Suunto.

Summary of Contents for X6HR







































































Reviews: