RING SCANNER
QUICK REFERENCE GUIDE
3
charging illustration 1 charging illustration 2
Connect the charging station to the power supply, then put the ring scanner
into the station with the scan window upward. Now the charging
contactors of the ring scanner and the station are contacted.
The red light on indicates it is in charging status while the green light on and
the red light off indicate charging completes.
Warning: don't look into the scan window directly to avoid the
laser harm to eyes.
2.2 Fetch the ring scanner from the station
Hold the sides of the ring scanner gently and pull out upward from the station.
3. Bluetooth connection
3.1 Working with a computer
Firstly, connect the charging station to a pc via a USB cable, the green light of the
charging station on indicates a successful connection. After waiting for 15 seconds,
scan the "Bluetooth connection barcode" on the side of the charging station with the
