RING SCANNER
QUICK REFERENCE GUIDE
7
6.4 Charging status:
6.5 Troubleshoot for Bluetooth connection
You can scan "restore factory settings" setting barcode (ref. xxx ) and try to reconnect
it after 10 second if the Bluetooth connection is not successfully established.
6.6 Protection mechanism after charging
To avoid the unexpected trigger and thus probably harm from laser beam to human's
eyes when the ring scanner is fetched from the docking station, the ring scanner is
designed to response the touch-key after touching it 3 times.
7. Maintenance
»The scan window must be kept clean. Improper maintenance will breach the limited
warranty.
» Avoid rough objects not to damage or scratch the window.
» Use brush to remove the stain.
» Use soft cloth (cloth for glasses) to clean.
» Prohibit spraying towards the window.
The green light flash indicates a successful scanning.
The red light double flash indicates low battery.
The green light turning off after turning on 1 second
indicates a successful Bluetooth connection.
The blue light turning off after turning on 1 second
indicates a broken Bluetooth connection.
The red, green and blue light turning on recurrently
indicates the state of reset.
The blue light on indicates a
successful Bluetooth connection
between ring scanner and the
docking station.
The green light on indicates the power is on,
The red light on indicates a charging status,
The red light off and the green light on during charging
indicates the completion of charging