Description of Function Codes NICE3000
new
User Manual
- 166 -
F6-40 Program Control Selection 1
Bit
Function
Description
Default
Bit13
Folding command
used as disability
function and back
door function
It is valid only when the function of Bit14 is enabled.
Bit13 = 1: Disability
Bit13 = 0: Back door
0
Bit14 Car call command
folding
There are two folding methods when this function is
enabled:
A. CN7 is used for front door calls or ordinary calls,
and CN8 is used for back door calls or disability calls.
B. For CN7 and CN8, inputs 1 to 16 are used for front
door calls or ordinary calls, and inputs 17 to 32 are
used for back door calls or disability calls.
0
Bit15
JP20 used for
switchover to back
door
JP20 is used for input of switchover between the front
door and the back door.
0
F6-41 Program Control Selection 2
Bit
Function
Description
Default
Bit0
Reserved
-
0
Bit1
Reserved
-
0
Bit2
Inspection to stop
due to slow-down 1
During inspection running, if the slow-down 1 acts, the
system decelerates to stop.
0
Bit3
Reserved
-
0
Bit4
Buzzer tweet during
door open delay
The buzzer will tweet when the door open delay time
set in Fb-14 is reached.
0
Bit5
Reserved
-
0
Bit6
Cancelling door
open delay
Door open delay is cancelled when the door open
delay button is pressed again.
0
Bit7
Reserved
-
0
Bit8
Elevator lock at door
open
In the elevator lock state, the elevator keeps the door
open at the elevator lock floor.
0
Bit9
Display available at
elevator lock
In the elevator lock state, hall calls are is displayed
normally.
0
Bit10 Elevator lock in the
attendant state
The elevator is locked properly in the attendant state.
0
Bit11 Blinking at arrival
The car display blinks when the elevator arrives at a
floor. The blinking advance time is set in F6-47.
0
Bit12 Door re-open during
door open delay
The door re-opens if the door open delay input is
active during door close.
0
Bit13
Door re-open after
car call of the
present floor
The door re-opens if the car call of the present floor is
valid during door close.
0
Summary of Contents for NICE3000 New
