Description of Function Codes NICE3000
new
User Manual
- 170 -
F6-45 Emergency Evacuation Function Selection
Bit
Function
Description
Default
Bit13
Mode of shorting
stator braking
mode switched
over to controller
drive
0
Time setting
If the time of the shorting stator braking mode exceeds
50s, the controller starts to drive the elevator.
0
1
Speed setting
If the speed is still smaller than the value of F6-48
after 10s in the shorting stator braking mode, the
controller starts to drive the elevator.
Bit14
Emergency
evacuation exit
mode
0
The system exits emergency evacuation when
receiving the door open limit signal from the elevator
that arrives at the target floor.
0
1
The system exits emergency evacuation when
receiving the door close limit signal from the elevator
that arrives at the target floor.
Bit15
Function
selection of
shorting stator
braking mode
It enables the function. When this function is enabled, the
setting of related function codes becomes effective.
0
Function Code
Parameter Name
Setting Range
Default
Unit
Property
F6-46
VIP function selection
0–65535
0
-
★
It is used to select the elevator VIP function. "1" indicates that the function is enabled, and
"0" indicates that the function is disabled.
The functions defined by the binary bits are described in the following table.
Table 7-12 VIP functions indicated by bits of F6-46
F6-46 VIP Function Selection
Bit
Function
Description
Default
Bit0
VIP enabled by hall
call (at VIP floor)
After this function is enabled, the system enters VIP
running.
0
Bit1
VIP enabled by
terminal
After the terminal for VIP hall call becomes ON, the
system enters VIP running.
0
Bit2-Bit7 Reserved
-
0
Bit8
Number of VIP car
calls limited
If this function is enabled, only one car call can be
selected simultaneously in the VIP state.
0
Function Code
Parameter Name
Setting Range
Default
Unit
Property
F6-47
Blinking advance time
0.0–15.0
0
s
☆
It is used to set the blinking advance time when the elevator arrives the floor required by the
car call.
Summary of Contents for NICE3000 New
