Suzohapp Coinco Vantage Series, Operation & Service Manual

4

number and serial number whenever you call 
your Coinco Service Center for information or 
service.
The fi rst four digits of the bill acceptor serial 
number indicate when the unit was built, which is 
also the beginning of the warranty period:
•

First two digits indicate week of
manufacture.

•

Third and fourth digits indicate the year.

For example, Serial number 1508000123 indi-
cates the unit was manufactured in the 15th week 
of 2008.

Icons

The following icons will guide you throughout the 
manual.  Each icon highlights an area you may 
want to pay closer attention to.

Indicates a checklist type of process that  
you can readily “check” as you proceed to  
the next step.

Indicates a warning that you should 
adhere to.  It is often accompanied by  
the words “DO NOT…” 

Indicates a helpful hint or shortcut to 
simplify the task.

Indicates where you can fi nd additional  
information regarding this specifi c topic.

Introduction

This manual contains information on installing, 
operating and maintaining  Coinco Vantage™  
Series bill acceptors.  This manual is intended for 
owners, route operators and shop-level 
technicians as a primary source of information.  
Taking time to read this manual and become 
familiar with the information will help you obtain 
the best performance from your Vantage bill 
acceptor.

Product Overview and Features

The Vantage bill acceptor incorporates a wide 
range of benefi ts, including:

•

Quick-Release bezel speeds installation
and 

removal.

•

Optional FlexStack™ bill box expands
from 200 bills to hold up to 500 bills.  Fixed
note bill boxes are available with between
300 and 1100 note capacities.

•

Illuminated bezel and status indicators
simplify setup and troubleshooting.

•

Patented note path lockout provides high
security Level Three stringing and fi shing
protection.

•

Smart Bezel™ (optional) actively
communicates ability to accept $5 bills.

Basic operational features include:

•

Bill widths accepted:

 66mm (for Vantage

Vx6 models) or 72mm (for Vx7 models).

•

Operating voltages:

 110VAC, 24VAC,

34VDC.

•

Communication Interface:

 MDB, Pulse,

Parallel, Vend Serial

•

Mounting:

 Upstack or Downstack.

•

Bezels:

 Basic, Slimline, or Downstack.

All versions feature standard Impulse
lighting.  Smart Bezel™ option is available
for Basic and Slimline versions.

•

Acceptance orientation:

 four ways.

•

Coupons:

 Teach-n-Go fi eld teach

capability.

For Your Records

A label indicating the bill acceptors model number 
and serial number can be found on the left side 
of the Vantage bill acceptor.  Refer to the model 

SECTION 1: GENERAL INFORMATION