Suzohapp Coinco Vantage Series, Operation & Service Manual

9

7.

With the vend price set below one dollar,
insert a one dollar bill.

8.

Verify credit has been established.

9.

Check the bill box to see that the one
dollar bill was properly stacked.

Confi guring Bill Acceptance and 

Other Acceptor Options

See Figure 4 for how to enter, navigate, and set 
bill acceptance and other options in Confi gura-
tion mode.  Figure 6 shows the four “pages” of 
bill acceptance options and Figure 7 shows two 
examples.

Several of the confi guration setting options bear 
further defi nition:

•

Coupon Acceptance:

 Enables or disables

acceptance of all user-loaded coupons.  If this
is set to “OFF”, 

no coupons will be accepted.

•

Smart Bezel™ (default setting for VLxxx2
and VXxxx2 models): 

enables the ability to

communicate in real time which bills are being
accepted by the bill acceptor.  If the user
wants to use Impulse lighting instead, they will
need to order the decal set as shown in
the Parts List. If a user of the VA, VLxxx4, or
VXxxx4  should wish to use this feature, they
will also need the same decal.

Impulse Lighting (default setting for all
VA,VLxxx4 and VXxxx4 models):

 illuminates

the upper blinking lights on the bezel.  Turn-  

ing off this option leaves only the lower  
inlet lights illuminated.

•

High Security vs. Standard Security Bill
Acceptance:

 the default Standard Security

setting (OFF) accepts 95+% of genuine street- 

grade bills.  High Security mode is 
recommended for locations with a higher risk  
of frauds. In High Security mode, the bill 
acceptor will still accept the same percentage  
of normal genuine street-grade bills,  but it    
will become more restrictive in accepting 

“borderline” notes – those seen as having 

defects or at the broader fringes of being  

 acceptable.

•

1-Way / 2-Way / 4-Way:

 Defi nes the number

of bill orientation directions that the bill
acceptor will accept.  The fi rst two are face-up
only, the last is all 4 possible orientations
(default).

•

Level 3 Security:

Recommended for higher

risk environments.  Provides additional level
of security against stringing and fi shing
attempts.  With Level  3 Security, the rest
position of the bill stack pushplate blocks
access to the bill path.

•

Diagnostic 

Diagnostic 

Flash Codes

Flash Codes

GRN

GRN

Flash Code

Validator Status

(solid)

S ales M ode / O K

S ervice M ode

YEL

x 1

C lean  U nit

S ervice U nit

RED

RED

C ashbox Full

C lear B ill P ath

O ut of S ervice

x 2

x 1

x 2

x 3

GRN

GRN

C oupon Teach

GRN

GRN

x 2

YEL

RED

RED

RED

RED

Operational

Warning

Out of Service

x 1

Diagnostic 
Indicator LED

Diagnostic 

Diagnostic 

Flash Codes

Flash Codes

GRN

GRN

Flash Code

Validator Status

(solid)

S ales M ode / O K

S ervice M ode

YEL

x 1

C lean  U nit

S ervice U nit

RED

RED

C ashbox Full

C lear B ill P ath

O ut of S ervice

x 2

x 1

x 2

x 3

GRN

GRN

C oupon Teach

GRN

GRN

x 2

YEL

RED

RED

RED

RED

Operational

Warning

Out of Service

x 1

Diagnostic 
Indicator LED

SECTION 2: INSTALLATION & SETUP

Figure 3