5-way coin sorter Cinco - Operating Manual
14
•
ccTalk applications (the coin mechanism guides the sorter)
•
Parallel applications (the machine guides the sorter)
The table below (which also appears on the sorter) indicates which connectors to use on
the basis of the coin mechanism and how the sorter is used.
The names of the connectors refer to the information appearing on the coin sorter, as
shown in the image below.
5.1 ccTalk Mode
There are two possible cases:
GEHxx1 coin mechanism (where xx can be any number)
§
Connect up the machine to the coin mechanism via a 4 pin ccTalk connector
§
Connect up the coin mechanism to the CN2 connector on the coin sorter with a 10 pole
flat (supplied)
§
JP2 must be open
§
JP1 must be positioned all the way to the left
GEHxx2 coin mechanism (where xx can be any number)