Disassembly and Assembly
SC 303/313
12
013447-101_rev-07
SCAN COIN
7
Disassembly and Assembly
WARNING!
Risk of electric shock!
Follow the Safety Precautions.
Note!
Some screws have nuts and/or washers. Be careful not to lose them
when removing the screws.
Note!
Assembly is the reverse of disassembly, if not stated otherwise.
7.1
Exchanging Fuses
a) Switch off the mains electrical supply and disconnect the lead
from the supply socket.
b) Remove the fuse holder box (1) from the rear of the machine by
simultaneously pressing in the securing side clips.
c) Exchange both fuses for ones with the same voltage and current
rating as those already fitted (T2 A).
Caution!
Use only fuses of the same current and voltage rating as those
originally fitted. The use of incorrect fuses could result in damage to
the machine.
d) Replace the fuse holder box and press it firmly in place.
Note!
There is also a 1 A fuse on the PSU board in the 24 V AC input to
the board from the transformer. Refer to
for details of how to gain
access to the PSU board.
1
1 Fuse holder box
Summary of Contents for SCAN COIN SC 303
