7-8
52SS0-01E
NOTE:
For more details, please contact a SUZUKI
dealer or a qualified workshop.
Changing Wheels
To change a wheel, use the following pro-
cedure:
1) Remove the jack, tools and spare
wheel from the vehicle.
2) Loosen, but do not remove the wheel
nuts.
3) Jack up the vehicle (follow the jacking
instructions in this section).
4) Remove the wheel nuts and wheel.
65J4033
5) Clean any mud or dirt off from the sur-
face of the wheel (1), hub (2), thread
part (3) and surface of the wheel nuts
(4) with a clean cloth. Clean the hub
carefully; it may be hot from driving.
6) Install the new wheel and replace the
wheel nuts with their cone shaped end
facing the wheel. Tighten each nut
snugly by hand until the wheel is
securely seated on the hub.
NOTICE
Never apply a garage jack to the
exhaust pipe or engine undercover
and rear torsion beam.
WARNING
• Shift into “R” (Reverse) when you
jack up the vehicle.
• Never jack up the vehicle with the
transmission in “N” (Neutral). Oth-
erwise, unstable jack may cause an
accident.
(2)
(4)
(1)
(3)
Summary of Contents for Carry Pro
