FUEL SYSTEM 5-13
LOW PRESSURE FUEL PUMP
4. Remove the fuel pump
1
, the pump rod
2
and the O-ring
3
.
INSTALLATION
Installation is reverse order of removal with the special atten-
tion to the following steps.
#
• Before installing the fuel pump, rotate the crankshaft
to bring the No.1 (top cylinder) piston to the Top
Dead Center on a compression stroke.
• Do not re-use the O-ring once removed. Always use
a new O-ring.
"
Low pressure fuel pump bolt:
10 N.m (1.0 kg-m, 7.0 lb-ft)
REMOVAL / INSTALLATION
REMOVAL
1. Remove both side covers. (See the page 7-2.)
2. Disconnect the hose
1
(inlet) and the hose
2
(outlet) from
the fuel pump.
3. Remove the two bolts
3
.