Suzuki Movano Owner'S Manual Download

Page: 83 / 353

Storage

Depending on version, the windows

in the rear door and sliding side

door(s) also contain window guards,

for additional protection and security.
Loading information

82.

Warning triangle

The warning triangle can be

accommodated in the space under

the front seats.
Underseat storage

75.

First aid kit

As a visible indication of the presence

of a first aid kit, a label may be located

on the overhead console

75.

The first aid kit can be accommodated

in the space under the front seats.

Using the two loops on the seat

cushion, pull the cushion forwards to

gain access.
Underseat storage

75.

Depending on version, the first aid kit

may alternatively be located in the

space between the front seats or in

the overhead console.

Fire extinguisher

As a visible indication of the presence

of a fire extinguisher, a label may be

located on the overhead console

75.

The fire extinguisher can be

accommodated in the space under

the front seats. Using the two loops on

the seat cushion, pull the cushion

forwards to gain access.
Underseat storage

75.

Depending on version, the fire

extinguisher may alternatively be

located in the space between the front

seats.
An additional fire extinguisher may be

located in the front door panel or in the

load compartment.

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands