7
3. SETTING THE MACHINE ON THE TABLE AND FOOT SWITCH
CAUTION : To prevent unexpected accidents when opening the carton box and setting the machine on
the table, pay attention sufficiently and work with over two (2) persons.
After taking out the machine from the carton box, place the machine on the sewing table with machine
base fixing screw completely. After fixing the machine head on the machine table, remove the feed table
lock belt. Install the thread guide stand into the machine table and main control box with screw under
the sewing table. Insert the main code into the connector of machine backside and foot switch code
connector into the main control box as shown in figure.
RECOMMENDED MACHINE TABLE SIZE : mm
40 1,000
Table thickness Machine base fixing screw hole(4 pcs.)
φ
7
Machine head Thread stand
Table
3 screws
Washer 4 pcs.
Stand
Washer 4 pcs.
Machine fixing
screw 4 pcs.
Thread guide stand position
600
560
40
350
135
180
289
Machine fixing nut 4 pcs.
that are inside of the base
for machine fixing screw
