SV 104 USER'S MANUAL_
DRAFT
_______________________________________________
_
32
4.6
Measurement Setups - basic configuration
Press two keys
<SCROLL>
and
<ENTER>
at the same time. The
“Load Setup”
menu
will appear with the list of loaded configuration setups to choose.
Figure 4-4
Load setup menu
To abandon setup selection, press again the
<SCROLL>
and
<ENTER>
at the same time.
Otherwise select the required configuration setup with
<ENTER>
key navigating thru the list with
<SCROLL>
or
<PROFILE>
key.
The following screen will appear, that will allow you to confirm you really want to load the selected
setup or cancel the selection and return to configuration setup list:
Figure 4-5
Load setup confirmation
Press
<SCROLL>
key to cancel the setup loading, or
<PROFILE>
key to confirm loading
selected setup configuration.
Confirming the loading of configuration setup leads to the screen with status of the loading procedure:
Figure 4-6
Status of setup loading
After successfully setup loading it is possible to return back to list of predefined setups by pressing the
<SCROLL>
key, or go further to measurement screen by pressing the
<PROFILE>
key.
