SVAN 948 USER MANUAL
_
5 - 20
•
VIEW
o
VIEW
enables the user to select which filter should be viewed; the available options are
VUSR1, VUSR2, VUSR3
and any other transmitted to the instrument from a PC by means of
the interface
After pressing the
<ENTER>
push-button another sub-list opens containing the values of filters
used in
1/1 OCTAVE
or
1/3 OCTAVE
analysis and saved under the name
VUSR1, VUSR2,
VUSR3
or any other
•
EDIT
o
EDIT
- enables the user to select which filters should be edited; the available options are as
follows:
VUSR1, VUSR2, VUSR3
or any other transmitted t o the instrument from a PC by
means of the interface
After pressing the
<ENTER>
push-button another sub-list opens containing the values of the
filters used in
1/1 OCTAVE
or
1/3 OCTAVE
analysis; the user can set the values of correcting
coefficients for all
1/3 OCTAVE
filters:
v
0.80 Hz:
available values of 0.8 Hz centre frequency filter:
-100.0dB ... 100.0dB
v
1.00 Hz:
available values of 1Hz centre frequency filter:
-100.0dB ... 100.0dB
v
v
...
v
…
v
20.0kHz:
available values of 20 kHz centre frequency filter:
-100.0dB ... 100.0dB
•
CLEAR
(position)
•
CLEAR
enables the user to select which filters should be cleared; the available options are as
follows:
ALL
,
VUSR1, VUSR2, VUSR3
or any other
SOUND FILTERS
•
VIEW
o
VIEW
enables the user to select which filter should be viewed; the available options are
SUSR1, SUSR2, SUSR3
and any other transmitted to the instrument from a PC by means of
the interface
After pressing the
<ENTER>
push-button another sub-list opens containing the values of filters
used in
1/1 OCTAVE
or
1/3 OCTAVE
analysis and saved under the name
SUSR1, SUSR2,
SUSR3
or any other
•
EDIT
o
EDIT
- enables the user to select which filters should be edited; the available options are as
follows:
SUSR1, SUSR2, SUSR3
or any other transmitted t o the instrument from a PC by
means of the interface
After pressing the
<ENTER>
push-button another sub-list opens containing the values of the
filters used in
1/1 OCTAVE
or
1/3 OCTAVE
analysis; the user can set the values of correcting
coefficients for all
1/3 OCTAVE
filters:
v
0.80 Hz:
available values of 0.8 Hz centre frequency filter:
-100.0dB ... 100.0dB
v
1.00 Hz:
available values of 1Hz centre frequency filter:
-100.0dB ... 100.0dB
v
v
...
v
…
v
20.0kHz:
available values of 20 kHz centre frequency filter:
-100.0dB ... 100.0dB
•
CLEAR
(position)
•
CLEAR
enables the user to select which filters should be cleared; the available options are as
follows:
ALL
,
SUSR1, SUSR2, SUSR3
or any other
The selection of the position in this sub-list is performed by means of the
<
>
,
<
>
(or
<
>
,
<
>
) push-buttons. The sub-list is closed and the instrument returns to the
SETUP
list after pressing the
Summary of Contents for SVAN 948
