SVAN 948 USER MANUAL
.
3 - 8
o
TOTAL 3:
(sub-list) enables one to select the weighted filter to be used for the
calculation of the
TOTAL
value in the third profile:
FILTER
: (position); available values of the weighted filters:
•
in the case of sound measurements:
LIN, SUSR1, SUSR2, SUSR3
or any
other sent to the unit by means of the interface
•
in the case of vibration measurements:
CH, VUSR1, VUSR2, VUSR3
or
any other sent to the unit by means of the interface
TYPE
: (position available only for vibration measurements); available values
if
VUSR1, VUSR2
or
VUSR3
was selected in the previous position:
ACC,
VEL
and
DIL
; if the
CH
filter was selected (the filter which was set in the 3
rd
channel) this position is not displayed
CAL. F.:
(position available only for vibration measurements); accessible if
VUSR1, VUSR2
or
VUSR3
was selected in the
FILTER
position; if the
CH
filter was selected (the filter which was set in the 3
rd
channel) this position is
not displayed; available values from
-60.0dB
to
60.0dB
with
0.1dB
or
1 dB
step
•
SPECTRUM TYPE
: (position); available values of this position:
ACCELERATION, VELOCITY
and
DISPLACEMENT
- in the case of
vibration measurements and
LEQ, RMS
- in the case of sound measurements
BUFFER VIEW
(sub-list)
§
NO.:
(position); available number of the files in the instrument’s buffer containing the results
of measurements
§
RECS
(position); it informs the user how many records with the measurement results contains
the selected file from the instrument’s buffer)
§
FREE
(position); it informs the user about the size of the available memory in the instrument’s
buffer
BATTERY
(window); it informs the user about the state of the internal battery of the instrument
CONTRAST
(position); it enables the user to select one from ten possibilities of the contrast of the
instrument’s display
BACKLIGHT
(sub-list)
§
TIMEOUT
(position), available values
[
√
√√
√
]
or
[ ],
if
[
√
√√
√
]
is chosen it will cause the self made
backlight switching off in the case when the keyboard is not used during the last 30 seconds.
If it happened the first pressing of any push-button switches the backlight on
§
BRIGHTNESS
(position); it enables the user to select one from four possibilities of the
brightness of the instrument’s backlight; the backlight is used both for the display and for the
keyboard
UNIT LABEL
(window); it informs the user about the serial number of the unit, the internal software
version, the internal memory size and the standards which the instrument fulfils
Summary of Contents for SVAN 948
