SVAN 948 USER MANUAL
.
3 - 10
v
FILE
(one of the main lists available after pressing the
<MENU>
push-button)
SAVE: [name of the file]
or
SAVE NEXT: [name of the file]
; the name of the file can be fully
edited in the
FILE NAME
window after pressing the
<ENTER>
push-button in the case of
SAVE
or can be edited in the simplify way by pressing the
<
>
,
<
>
push-buttons together with
<SHIFT>
- in the case of
SAVE NEXT
; the
No results!
text is displayed in the case when the
instrument did not perform any measurement
SAVE OPTIONS
(sub-list)
§
RAM FILE:
(position); it enables the user to save the results of the measurement in the
special file at RAM memory (the name of the file is defined as a “RAMfile”), this option is
useful when remote reading is necessary, e.g. during the long term monitoring; the results are
saved all the time in the same space of the units memory; available values:
[
√
√√
√
]
or
[
]
§
REPLACE:
(position); it enables the user to replace the existing files in the instrument’s
memory by the files having the same name; available values:
[
√
√√
√
]
or
[ ]
§
SAVE STAT.:
(position); it enables the user to save or not to save along with the
measurement results the calculated statistics; available values:
[
√
√√
√
]
or
[ ];
position available
only in the sound meter mode
;
in the
vibration meter
mode this position is taken off from the
menu
§
AUTO SAVE:
(position); it enables the user to save the measurement results in the
instrument’s memory without entering
SAVE
or
SAVE NEXT
position (in order to perform this
operation the
INT
.
TIME
should be set to at least
10 s
); available values:
[
√
√√
√
]
or
[ ]
LOAD
(sub-list); it enables the user to verify the list of files in the memory and to load to the
working buffer of the instrument the selected one; the
NO FILES
text is displayed in the case
when the instrument’s memory is empty
DELETE
(sub-list); it enables the user to verify the list of files in the memory and to delete the
selected one; the
NO FILES
text is displayed in the case when the instrument’s memory is empty
DELETE ALL
(sub-list); it enables the user to delete all files saved in the instrument’s memory;
the confirmation is required before the erasing of all files
§
Are you sure?
DEFRAGMENTATION
(sub-list); it enables the user to recover the memory which was previously
used by the deleted files; the confirmation is required before the execution of this operation
Are you sure?
The text
Defragmentation …unnecessary PRESS ANY KEY
is displayed when the instrument’s
memory was empty before trial of the defragmentation
CLEAR BUFFER
(position); it enables the user to delete all files saved in the buffer of the
instrument; the confirmation is required before the erasing of all files from the buffer memory
§
Are you sure?
CATALOGUE
(sub-list); it enables the user to verify the list of files in the memory; the
NO FILES
text is displayed in the case when the instrument’s memory is empty
FREE SPACE
(window); it informs the user about the size of the available memory for saving the
measurement results in the files and the
TOTAL AVAILABLE
bytes of the memory (the number
displayed in the
FREE SPACE
increased by the memory which was previously used by the
deleting files)
Summary of Contents for SVAN 948
