SVAN 948 USER MANUAL
.
4 - 26
a
)
b
)
The view of the sub-lists: CHANNELS SETUP (a) and CHANNEL 2 (b)
Setting parameters in a channel - CHANNEL x
In the
CHANNEL x
sub-list the following parameters can be programmed independently for each
channel:
-
mode,
-
range,
-
weighting filter,
-
RMS detector type
.
Passing throughout the sub-list is possible by pressing the
<
>
,
<
>
push-buttons. The settings
made in
CHANNEL x
sub-list are different for the measurement of sound and the measurement of
vibration. Below, the settings in the
SLM
mode are presented.
Selection of the instruments mode - MODE
The instrument work in parallel
four independent sound / vibration level meters channels,
which perform the measurement of the signal with the selectable combination – user can configure each
channel separately.
In the case of vibration measurements, the user has to select in
CHANNEL x
(
path: MENU / INPUT /
CHANNELS SETUP / CHANNEL x)
sub-list the
VIBR.
mode in the
MODE
position. In the case of sound
measurements, the user has to select in
CHANNEL x
sub-list the
SOUND
mode in the
MODE
position.
The view of the displays in the CHANNEL 1 sub-list; the selection of the instruments mode
Selection of the measurement range - RANGE
The selection of the input range is possible after entering the
RANGE
position
(path: MENU / INPUT/
CHANNEL x/ RANGE)
(from the
INPUT/ CHANNEL x
list by means of the
<
>
,
<
>
(or
<
>
,
<
>
) push-
buttons and pressing the
<ENTER>
one. The input ranges specified in Appendix C. The return to the
CHANNEL x
list is made after pressing the
<ESC>
push-button (ignoring the changes) or
<ENTER>
push-button (confirming the selection).
The view of the displays with the RANGE
(
path: MENU / INPUT / CHANNEL x /RANGE)
position selected
Summary of Contents for SVAN 948
