CV0204DVR
48
SVAT ELECTRONICS
Now You Can See
5. WESTELL
5. WESTELL
ROUTER
ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your
network device. Regardless of the Westell Router being used, the process of port
forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen. The set up instruction outlined below is an example of port forwarding
a Westell Router using
Westell VERSALINK
.
Step 1:
Open your web browser.
Enter the router IP address (
192.168.62.1
) in the address bar as shown below, followed
by pressing
Enter
.
Step 2:
Enter
‘admin’
in the User Name and
‘admin’
in the Password dialog box to enter the
Westell configuration page.
Step 3:
Select
‘Configuration’
Step 4:
Select the
Define Custom Service
Tab.
Step 5:
In the Port Range setting screen, proceed as follows:
In the
Service
Name field, type DVR
In the
Global Port
Range field, enter in the first box, the first number of the
port you need to port forward (e.g. 80) and in the second box the ending port
number (e.g. 80)
In the
Base Host
Port enter the first port to be forwarded (80)
In
Protocol
, select TCP
Select the
Next
button when complete
Step 6:
A confirmation window will appear on the screen which shows the same information just
entered. Select the close button to continue. You should now be in the Configuration
Window screen. Select the Define Customer Service button, followed by selecting the
Port Forwarding Ranges of Port option. Finally click the Next button.
Step 7:
Use the Select a Service drop down box and select the configuration just created. Select
the Enable button.
Port forwarding is now complete!
6. NETGEAR ROUTER
6. NETGEAR ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your
network device. Regardless of the Netgear router being used, the process of port
forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen. The set up instruction outlined below is an example of port forwarding
a Netgear Router using
Netgear Model DG 824M
.
Step 1:
Open your web browser.
Enter the router IP address (
192.168.0.1
)in the address bar as shown below, followed by
pressing
Enter
.
