CV0204DVR
49
SVAT ELECTRONICS
Now You Can See
Step 2:
Enter
‘admin’
in the User Name and
‘password’
in the Password dialog box to enter the
Westell configuration page.
Step 3:
Select the
Services
button in the
Security menu
Step 4:
In the
Services
menu, select the
Add Custom Service
button
In the
Services
screen, proceed as follows:
In the
Name
field, select DVR
In the
Type
field, select TCP
In the
Start Port
field, enter the first number of the port you need to port forward (e.g. 80)
In the
Finish Port
field, enter the ending port number (e.g. 80)
Check the
Apply
buttonNext, in the
Security
option, select
Rules
Next, in the
Rules
screen select
Add
in the inbound services.
Next, in the
Inbound
services proceed as follows:
In the
Service
drop down list, select the newly created DVR entry.
In the
Action
field, select
ALLOW
always.
In the
Send to LAN
Server field, enter your computers IP address.
In the
WAN Users
field, set to Any.
In the
Log
field, set to Never.
Click on
Apply
.
Port forwarding is now complete!
7. NET
7. NET
OPIA
OPIA
ROUTER
ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your
network device. Regardless of the Netopia router being used, the process of port
forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen. The set up instruction outlined below is an example of port forwarding
a Netopia Router using
Netopia Model 3346
.
Step 1:
Open your web browser.
Enter the router IP address (
192.168.62.1
)in the address bar as shown below, followed
by pressing
Enter
.
Step 2:
Enter
‘admin’
in the User Name and
‘1234’
in the Password dialog box followed by
‘OK’
to enter the Netopia configuration page.
Step 3:
Select
Expert
Mode
Step 4:
Select the
Yes, enter expert mode
button
Select Configure followed by selecting
NAT
Step 5:
Select the
Define Custom Service
button
Select
Port Forwarding Range of Ports
, followed by
Next
