CV0204DVR
51
SVAT ELECTRONICS
Now You Can See
9. WIRE ROUTER
9. WIRE ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your
network device. Regardless of the 2 Wire Router being used, the process of port
forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen (Note: in many 2 wire systems, it is located in the firewall setting). The
set up instruction outlined below is an example of port forwarding a 2 Wire Router using
2 Wire Model 1800G
.
Step 1:
Open your web browser.
Enter the router IP address (
192.168.1.254
) in the address bar as shown below, followed
by pressing Enter.
Step 2:
Select the
Firewall
Tab.
Step 3:
Select
Firewall
Settings..
Step 4:
In the
Edit Firewall Settings
tab, select add a new user defined application
Step 5:
Select the
Back
button to return to the Edit Firewall Screen
In the
Edit Firewall
Settings proceed as follows:
In the
Application
Name field, type
DVR
In the
Protocol selection
, select
TCP
In the
Port field
, enter in the first box, the first number of the port you need to port
forward (e.g. 80) and in the second box the ending port number (e.g. 80).
Select the
Add Definition
button.
Step 6:
In the Edit Firewall Settings proceed as follows:
In the
Select a Computer
field, select
DVR
In the
Edit a Firewall
Setting, check the
Allow Individual Applications
box and
highlight the DVR application which you just created. Click
Add
.
Finally select the
Done
button at the bottom of the screen.
Port forwarding is now
complete!