background image

 4 

Copyright SVB-Spezialversand Bremen / www.svb.de / Rev. 2018

Your receive the electric bike in a pre-assembled state which is not in running 
condition.

 

Before the first use, you need to examine/adjust all screws etc. and tighten them 
if required! Brakes and hang-on parts are to be checked for flawless condition 
and correct fitting. Also assure a tight and ergonomically correct placement of the 
control panel on the handlebar. 

ATTENTION: an inappropriate final assembly causes loss of warranty.

Complete the bike before first usage. 
Check all screws and familiarise yourself with the folding mechanism. Careless, 
hasty or inexperienced handling can lead to injuries.

Before stowing the bicycle in the valise and taking it on board, you should have 
already checked all the bike‘s functions and familiarised yourself with the bike‘s 
riding characteristics on a thorough test ride. 
Before stowing the bike in the valise, the pedals need to be folded up.

Should the tyres be out of round laterally/radially, reduce the air pressure and 
correctly position the mantle in the wheel rim. Afterwards, assure optimal tyre 
pressure between 2,8 and 4,6 bar.

According to road traffic regulations, every bicycle is to be equipped with lights. 

This user manual does not share the properties of repair / installation and setting 
instructions. If you want to tune your bike yourself, you should have a certain 
basic knowledge or leave the bike at a specialised company for service or repair. 
Damages caused by an improper final assembly are not subject to guarantee/
warranty. Many of the bike‘s parts are standarised and available in specialised 
trade. Should you not be able to acquire certain parts, we will of course do our 
best to help you. 

Please keep in mind that you bought an onboard fold-up bike and riding 
behaviour as well as stability cannot be compared to those of a tour or mountain 
bike. Limitations in resilience due to the folding mechanism and small size are 
to be expected. Overstraining, e.g. emergency stops when riding down a slope, 
heavy pedaling while standing or the transportation of heavy luaggage can lead 
to damages or breakage with injury risk. 

Before every ride, check the correct fit of all quick release fastener clamping 
levers, the locking of the battery, the seat‘s height, the handlebar‘s height, the 
handlebar‘s position and the folding joints.

If you have additional questions about our products,  feel free to call us. We will 
assist you immediately.

Summary of Contents for Seatec Blizzard Pro























Reviews: