Microscope Accessories
Operation
Install battery
Due to the SV603 portable microscope has high
magnification power
(
60x-120x
)
, if the microsc-
ope illumination is not turned on, it may be low
light and affect the observation effect, so it is
recommended that you install the battery and
turn on the lighting.
1. Remove the battery compartment cover.
2. Insert 1 AAA battery.
3. Install the battery compartment cover back to
its original position.
4. Turn on the LED light.
Note: The LED light has 3 levels: low light,
strong light, and off.
Users can choose different light intensities
according to their needs.
Operation
The SV603 portable microscope has 2 Specim-
ens in the package. Choose one specimen
beginning the observation. Do as followings:
1. Place the specimen facing up and horizontally
on a flat table. Put a piece of white paper with
a smooth surface under the slice for a better
experience.
2. Aim the microscope objective lens at the
specimen and gently place it on the section
to turn on the LED light.
3. Align one eye to the eyepiece for observation.
If the specimen is not observed, you can
slowly follow the deviation direction. Slowly
adjust to the proper position.
4. Adjust the focus ring, It is recommended to
start observation from the lowest magnificat-
ion 60x. Turn the focus ring until the image is
clear.
Note: Do not forcefully squeeze the specimen
section during observation to avoid
damage to the product or section.
5. Please turn off the LED lights in time after
the observation.
1x bag
1x AAA battery
2x Specimen
(Bee leg slices & Onionskin slices)
2
3
