161
HDR-106
MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
8.3
Rack Unit Installation
When the receiver is installed in a rack unit horizontally, guides should be
used due to the weight of the equipment. Furthermore, the receiver has to
be well chilled and therefore, some space must be left next to the sides of
the HDR-106 receiver for ventilation purposes. This is especially important
when the rack unit is installed in a rack case.
Figure 8.5 Back view of the HDR-106 receiver
8.4
Down-Converter Installation
The down-converter should be installed next to the receiver antenna. The
cable that connects the antenna output to the down-converter input should
be as short as possible if the losses in the cable at high RF frequencies are
high. For better performance high quality cables and connectors should be
used.
The down-converter is powered by the receiver by the IF output. So the IF
output of the down-converter should be connected to one IF input of the HD
diversity receiver. With the HDR-106 (Diversity 6) up to 6 down-converters
can be connected to the receiver.
Figure 8.6 Down-Converter
The power supply to the down-converters should be disabled in the receiver
when the down-converters are being installed.
Summary of Contents for HDR-106
Page 208: ...207 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 209: ...208 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 210: ...209 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 211: ...210 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0 Notes...
