HDR-106
MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
3.1.5
2
nd
Main Screen (For the DVB-T2/T)
In this second screen, the levels and the carrier to noise ratio values of six
IF inputs are shown. In order to see the parameters of the IF inputs, press
the Up, Down arrow buttons.
Figure 3.5 Main screen 2
The second main screen (figure 3.5) displays this information for each IF
input:
Input signal level:
The possible values in this field are from 1 to 99
where a received signal of value 1 is a very weak signal whereas a
received signal of value 99 means a very strong received signal.
C/N (Carrier to Noise Ratio):
The possible values in this field are from
1 to 9 where a received signal of value 1 is a very noisy signal whereas a
received signal of value 9 means a very clean received signal.
3.1.6
3
rd
Main Screen (For the DVB-T2/T)
In this third screen, the level of the six possible DVB-T2 or DVB-T received
signals is displayed.
Figure 3.6 Main screen 3
The third main screen (figure 3.6) displays this information for each IF
input:
Input signal level:
It displays a number of bars. A high number of bars
means a high level of the received signal.
L5 [ ]: -- C/N5 [ ]:-
L6 [ ]: 99 C/N6 [ ]:8
L1 L2 L3
L4 L5 L6
Summary of Contents for HDR-106
Page 208: ...207 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 209: ...208 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 210: ...209 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 211: ...210 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0 Notes...