HDR-106
MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
3.7
Menus
Using the menu of this receiver the user can change receiver’s parameters
and configure them.
When the receiver is firstly switched on, the main screen appears. There are
four possible screens that show the parameters of the received signal/s and
the quality of these signals (to change from one of this screen to another
one, press the OK button):
The first one shows the parameters of the received signal/s.
The second one shows the level and quality of the received signal/s
selectable by user (for DVB-T2 and DVB-T).
The third one shows the level of the six possible DVB-T2/T received
signals.
The last one shows the level and the C/N value of the received signal
which has the best values of these parameters.
To enter the menu of this equipment cross button must be pressed.
In case it is wanted to return to the main screen from the menu, cross
button must be pressed again. Furthermore, in case of being in the
submenus area, returning to the mainly screens is achieved by pressing the
cross button as much times as it is needed.
In the next page it is shown a scheme that specifies the different menu
options available.
Summary of Contents for HDR-106
Page 208: ...207 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 209: ...208 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 210: ...209 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 211: ...210 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0 Notes...
