45
HDR-106
MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
5
DVB-T2
IF Cable:
In this field, it must be specified the type and the length of the cable
used between the input and the down-converter. So as to select the
type of the cable, first press the OK button. Then, so as to choose
the type of cable press the Up, Down arrow buttons. Once the type
of the cable has been selected, press the OK button again so as to
move to the length option. Then, with the Up, Down, Right and Left
buttons the length can be selected. So as to save the introduced
value, press the OK button. (the type of the cable is an eligible
parameter and the length of the cable is an editable parameter)
The available options are:
Not used
Type:
-
BELD PRG11
-
BELD H125
-
LDF450A 1/2
-
CEFLEX 1/2
-
RG-142
-
RG-58
-
RG-214
-
LMR-400
6
DVB-T2
Demod Monitor:
In this field, the number of the IF input (from 1 to 6) which is
wanted to be monitored must be selected. Once it has been
selected, OK button must be pressed so as to access to the monitor
screen where the parameters of the received signal shown below are
displayed. (reading parameters)
The available options are:
Level (dBm)
SNR (dB)
MER (dB)
Const (QPSK, 16QAM, 64QAM, 256QAM)
FEC (1/2, 3/5, 2/3, 3/4, 4/5, 5/6)
TG (1/4, 19/128, 1/8, 19/256, 1/16, 1/32)
Mod (1K, 2K)
Spec (spectrum normal or inverted)
Rot (constellation rotation enabled or disabled in the received
signal)
Time IL Type (time interleaving mode)
Length (number of frames in one interleaving frame)
Table 3.7 DVB-T2 Input Select menu options
Summary of Contents for HDR-106
Page 208: ...207 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 209: ...208 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 210: ...209 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 211: ...210 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0 Notes...