79
HDR-106
MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
Line nº
Function
1
Audio Volume:
Select the level of the audio output signal. The level range is from 0
to 15 where the higher one is the number 15 and the lower one is 0.
(elegible parameter)
2
Audio Speaker:
In this field, the mode of the audio output can be selected with the
Right, Left buttons. (eligible parameter)
The available options are:
None:
Both of the audio outputs are disabled.
Left:
Select this option to have the left channel of the
audio output enabled and the right one disabled.
Right:
Select this option to have the right channel of the
audio output enabled and the left one disabled.
Right & Left:
Select this option if it is wanted to have
both of the audio channels (right and left) enabled.
Table 3.20 Audio Monitor menu options
3.7.2.6.3
Unit Alarms Screen
Pressing the OK button, the alarms that are taking place can be seen in this
option.
Figure 3.67 Alarms Menu
In this option, different alarms which appear in the device are shown.
The different alarms that can appear in the receiver are:
Input Signal Not Present
Decoder Is Not Decoding
1 INPUT SIGNAL NOT PRESENT
2 DECODER IS NOT DECODING
Summary of Contents for HDR-106
Page 208: ...207 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 209: ...208 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 210: ...209 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0...
Page 211: ...210 HDR 106 MPEG2 H264 4 2 2 10 bits DVB T2 T Diversity 6 Receiver MANUAL V7 0 Notes...
