background image

Item number:

 

KFT.23.017.30000/B

Revision:

 

00 · Date:

 

11 - 2022

PRO side carrier

 ~ 1 h.

EASY

 





 

DIFFICULT

ENGLISH ·

 

Thank you for choosing this premium product from SW-MOTECH.

Visit our online shop for more information (e.g. model assignments). Required

documents (e.g. general certification) are available there for you to download.

Please  read  and  understand  all  the  instructions,  safety  information  and

warnings  in  these  mounting  instructions  before  mounting  and  using  the

product  in  order  to  avoid  injury  and  damage.  Keep  these  mounting

instructions  for  reference.

This product was developed for vehicles in factory condition. Compatibility

with original accessories or accessories from other manufacturers cannot

be guaranteed.

These mounting instructions have been prepared to the best of our current

knowledge.  No  legal  claims  relating  to  accuracy  can  be  made.  Errors  and

omissions  excepted.  We  reserve  the  right  to  make  technical  and  design

changes. The copyright is held by SW-MOTECH.

 

SAFETY WARNING SYMBOL

 

This  warning  symbol  is  used  in  these  mounting  instructions  to  warn  of

deadly dangers, injuries or other hazards. The words DANGER, WARNING or

CAUTION are used as part of this warning symbol to convey important safety

messages  and  information  relating  to  the  installation  and  use  of  this

product.  These  words,  together  with  the  safety  warning  symbol,  mean:

 

DANGER:

 

Indicates a hazardous situation which, if not avoided, will result

in death or serious injury!

 

WARNING:

 

Indicates  a  hazardous  situation  which,  if  not  avoided,  may

result in death or serious injury!

 

CAUTION:

 

Indicates a hazardous situation which, if not avoided, may result

in minor or moderate injury!

 

NOTE:

 

Important information, but not relating to a risk of death or injury

(property damage only)!

 

GENERAL INFORMATION

 

WARNING:  Assembly  and/or  maintenance  of  this  product  requires

advanced  technical  skills,  appropriate  tools  and  a  good  understanding  of

tool  usage  and  torque  specifications.  For  your  own  safety,  SW-MOTECH

recommends that assembly and/or maintenance is carried out by a qualified

and certified two-wheeler workshop.

 

WARNING:  If  you  decide  to  install  this  product  yourself,  read  the

installation instructions carefully and fully before installation and use, and

follow  all  instructions  to  avoid  serious  or  fatal  injuries.  Also  observe  all

relevant  information  in  the  vehicle  manual  when  mounting  and  using  the

product.  IF  YOU  DO  NOT  UNDERSTAND  ANY  PART  OF  THESE  MOUNTING

INSTRUCTIONS OR REQUIRE EXPLANATION OF ANY INSTRUCTION, DO NOT

ATTEMPT TO INSTALL THIS PRODUCT WITHOUT ASKING SW-MOTECH FOR

HELP!

PREPARATION:

 

Read  the  mounting  instructions  carefully  and  make  sure

that all parts on the parts list are available.

 

CAUTION:

 

Ensure that your vehicle is standing securely. Switch off the

engine  and  remove  the  ignition  key.  Allow  the  engine/exhaust  to  cool

down, if necessary. Disconnect the battery when working on the electrics.

Only  use  suitable  tools,  and  always  wear  protective  goggles  and  gloves

during assembly and maintenance. Have a second person help you during

assembly and maintenance.

 

ASSEMBLY:

 

All  parts  and  connections  removed  from  the  vehicle  must  be

reinstalled  according  to  the  vehicle  manufacturer's  specifications  or

replaced  with  parts  and  hardware  supplied  by  SW-MOTECH.

 

WARNING:

 

Secure  all  threads  with  a  medium-strength  liquid

threadlocker,  unless  otherwise  specified.

 

DANGER:

 

Tightening  torques  not  defined  by  SW-MOTECH  must  be

obtained  from  the  vehicle  manufacturer  or  a  certified  motorbike

workshop.

 

FUNCTIONALITY CHECK:

 

After assembly, make sure that no moving parts

are  obstructed  and  that  the  function  of  the  vehicle  is  not  impeded.  Cables

and hoses must not be chafed and/or pinched.

 

WARNING:

 

Carry  out  a  comprehensive  functionality  check  before  you

start to drive. Check the tightening torque of all connections and the tight

fit  of  the  product  after  the  first  50  km  and  then  at  regular  intervals.

Mounted accessories can change the handling and stability of the vehicle.

MOUNTING INSTRUCTIONS · 

READ AND KEEP MOUNTING INSTRUCTIONS!

SW-MOTECH GmbH & Co. KG

 

Ernteweg 7-10

35282 Rauschenberg

Germany

 

 

 

 info@sw-motech.com

 www.sw-motech.com

The content translation is automated.

© SW-MOTECH GmbH & Co. KG

Errors and omissions excepted

Subject to technical and design changes.

1

Summary of Contents for KFT.23.017.30000/B








Reviews: